CW Larger Lathe
Description
CWE Series
This machine tool is capable of various coarse and fine turning of ferrous metal, nonferrous metal and non-metal work-pieces, such as turning of inner and outer cylindrical surfaces, conical surface and other surfaces of revolution. It is also capable of turning of end faces and various metric, inch, module and pitch threads in common use as well as multiple-threads. Moreover, it enables drilling, reaming, oil channeling and so on thereon.
The dimensional accuracy of work-pieces processed on this machine tool can reach IT7 level, with its roundness error being no larger than 0.01 and its cylindricity on 300 mm length being no larger than 0.03. Its surface roughness can reach 1.6 (for standard sample piece).
CWA Series
The machine tool is mainly to process various rough and fine turning of ferrous metal, nonferrous metal and non-metal work pieces, such as, turning internal and external cylindrical surface, conical surface and other rotary surface; it can turn end face and various commonly-used metric system, British system, modulus, pitch thread and multiple threads.
Details
Parameter
MODEL |
CWA61100 |
CWA61125 |
CWA61140 |
CWA61160 |
CWA62100 |
CWA62125 |
CWA62140 |
CWA62160 |
|
Max.weight of workpiece |
8T |
|||
Max.swing over bed |
1000mm |
1250mm |
1400mm |
1600mm |
Max.swing over cross slide |
620mm |
870mm |
1000mm |
1200mm |
Max swing over gap |
1300mm |
1550mm |
1700mm |
1900mm |
Valid length of gap |
450mm |
|||
Center distance |
1.5m 2m 3m 4m 5m 6m 8m 10m 12m |
|||
Width of bed |
780mm |
|||
HEAD STOCK |
||||
Spindle hole |
Φ130mm |
|||
Spindle taper |
140# |
|||
Spindle speeds |
3.15-315r/min or 2.5-250r/mm. |
|||
GEAR BOX-THREADS&FEEDS |
||||
Metric threads range(kinds) |
44kinds 1-120mm |
|||
Inch threads range(kinds) |
31kinds 1/4-24 |
|||
Moudle threads range(kinds) |
45kinds 0.5-60mm |
|||
Diametral threads range(kinds) |
38kinds 1/2-56DP |
|||
Longitudinal feeds range(kinds) |
56kinds0.1-12mm |
|||
Cross feed range(kinds) |
56kinds 0.05-6mm |
|||
Rapid feed:Long/Cross |
3400mm/min,1700mm/min |
|||
TOOL-POST |
||||
Distance between Center & Tool |
48mm |
|||
Tool section |
45*45mm |
|||
CARRIAGE |
||||
Cross slide travel |
650mm |
|||
Compound rest travel |
280mm |
|||
TAILSTOCK |
||||
Sleeve diameter |
Φ160mm |
|||
Sleeve taper |
80# |
|||
Sleeve travel |
300mm |
|||
MOTOR |
||||
Main motor |
22kw |
|||
Coolant motor |
0.15kw |
|||
Rapid feed motor |
1.5kw |
MODEL |
CW61128 |
CW61148 |
CW61168 |
CW61198 |
CW61208 |
CW62128 |
CW62148 |
CW62168 |
CW62198 |
CW62208 |
|
Max workpiece weight |
12T |
||||
Max swing over bed |
1280mm |
1480mm |
1680mm |
1980mm |
2080mm |
Max swing over cross slide |
840mm |
1040mm |
1240mm |
1500mm |
1600mm |
Center distance |
2m 3m 4m 5m 6m 8m 10m 12m |
||||
Max swing over gap |
1580mm |
1780mm |
1980mm |
2280mm |
2380mm |
Valid length of gap |
600mm |
||||
Bed width |
1100mm |
||||
Headstock |
|||||
Spindle bore |
Φ130mm |
||||
Spindle taper |
140# |
||||
Spindle speeds |
3.15-315r/min or 2-200r/mm or 2.5-250r/mm. |
||||
GEAR BOX-THREADS & FEEDS |
|||||
Metric threads range |
44kinds 1-120mm |
||||
Inch threads range |
31kinds 1/4-24 |
||||
Moudle threads range |
45kinds 0.5-60mm |
||||
Diametral threads range |
38kinds 1/2-56DP |
||||
Longitudinal feeds range |
56kinds 0.1-12mm |
||||
Cross feed range |
56kinds 0.05-6mm |
||||
Rapid feed:long/cross |
3400mm/min,1700mm/min |
||||
TOOL POST |
|||||
Distance between Center&Tool |
48mm |
||||
Tool section |
45*45mm |
||||
CARRIAGE |
|||||
Cross slide travel |
860mm |
||||
Compound rest travel |
280mm |
||||
TAILSTOCK |
|||||
Sleeve diameter |
Φ260mm |
||||
Sleeve taper |
80# |
||||
Sleeve travel |
300mm |
||||
MOTOR |
|||||
Main drive motor |
30kw |
||||
Coolant pump motor |
0.15kw |
||||
Rapid feed motor |
1.5kw |
||||
Tailstock motor |
1.5kw |